Today’s post is sponsored by CurrentBody! Read the other installments of our partnership here.
Since the release of their Series 1 mask in 2019, every new CurrentBody LED mask has built upon the last, with innovative upgrades that reflect what the evidence supports. The Series 2—of which I’ve been a near daily loyal user since its 2024 launch—overhauled the design for a better-fit and engineered a solution to ensure each and every bulb delivered the precise wavelength promised. The brand new Series 3 isn’t a complete reinvention (they nailed the design and precision…if it ain’t broke, don’t fix it, right?), but rather an expansion of its capabilities: a first-of-its kind customizable LED mask that accounts for the amount of LED your skin can actually absorb in order to maximize benefits, guarantee precision and prioritize safety.
The CurrentBody Series 3 introduces MyDose™, allowing you to build your own personalized treatment LED by LED and allowing me to dive into one of the lesser talked aspects of LED therapy: dosage. (A very exciting opportunity for LED’s Preeminent Defender/longtime CurrentBody devotee 🤓)
In order for an LED device to actually be effective, certain parameters must be met, some of which you’re likely already a bit familiar with. For those who want to delve into the science, this post has you covered, but otherwise here’s a simplified explanation of those parameters:
The wavelength must be specific and precise, as different wavelengths penetrate to different depths in the skin, targeting different light-sensitive structures called chromophores. The irradiance/power must be the right strength, so that the light energy can be properly absorbed once it reaches the target. The dose has to be delivered at an effective threshold, so that the intended results can occur. Optimizing this parameter—the dose—is the basis for the Series 3.
The Series 3 and MyDose™
The Series 3 takes everything that stands out from the Series 2 (ultra-precise, targeted wavelengths, evenly distributed LEDs, 10-minute treatment time and a flexible best-fit shape) and adds an extra level of customization with MyDose™ technology.
Each bulb on the mask is capable of delivering six different wavelength options: red, near-infrared, deep near-infrared, blue, yellow and green. Based on the wavelength inputs, MyDose™ automatically calculates and adjusts the energy output and optimal dosage, keeping total irradiance under 40mW/cm². It prevents over-delivery of light and ensures precise delivery—I’ll get into the importance of this, and the wavelengths, below.
Using the app (connected to your mask via Bluetooth) you can use one of the 4 preset treatments or create your own custom treatment, literally deciding the placement of each wavelength bulb by bulb, tailoring the treatment to fit changing skin goals/concerns. You can even share your customized treatments with friends (or I, as your esthetician, can create custom treatments for you!)
But Jolie! You already convinced me to buy the Series 2. Do I need to upgrade? You can, but you sure don’t have to and CurrentBody doesn’t necessarily expect you to either (here’s what the CEO said when I asked him this exact question during our interview). The Series 2 is still available and has the same shape, treatment time and the 3 clinically-proven foundational wavelengths described below, just in fixed positions. It’s a perfect choice for anyone who wants the highest-quality, most streamlined option.
What’s a sufficient dose?
Within the context of oral medication, like ibuprofen, prescription medications or antibiotics, it’s easy to understand how the dose is key to efficacy. If you take less than the recommended dose, you won’t get the full effect. If you take more (literally overdose), you don’t get extra powerful relief—at best you reach a plateau, but sometimes you cross over into dangerous territory. But the proper dose isn’t just tied to the amount that you take, it’s also tied to the timing. Every 4 to 6 hours, daily at breakfast etc.
Another way to think about this relationship is with baking a cake. There’s a reason you do 350° for 40 minutes and not 700° for 20 minutes. A higher temperature is not more powerful. Instead, it’s the lower temperature, delivered consistently over a period of time. That’s the dose.
With LED, it’s the same thing: the sufficient dose is tied to using the right wavelength, at the right power, delivered over the right amount of time. More power does not equal better results. The amount of LED your skin can absorb is very specific. It follows something called a “biphasic dose-response.” Too little won’t do anything, but too much—or an imprecise wavelength—inhibits, or at times reverses, the benefit. An irradiance of 30-50 mW/cm² is optimal.
Other things intertwined with the dose, which were optimized beginning with the Series 2:
Coverage/fit: Fewer gaps between the bulbs and your skin leads to even light coverage across the entire face. Obviously no mask will fit every face perfectly, but CurrentBody’s is as close as you can get. Instead of a mask cut from a flat sheet of silicone, their design uses medical-grade poured liquid silicone to allow for a curved, flexible, best-fit shape that evenly exposes your skin to the light and naturally curves to fit face contours, with a chin strap for additional coverage.
Precision: Within all light wavelength ranges, there are specific wavelengths proven to be the most effective with LED therapy. For optimal results, each individual bulb needs to be as precise as possible. Variations in wavelength output leads to inconsistent and unreliable results, with some areas of the face receiving better treatment than others. CurrentBody ensures wavelength precision with Veritace®, their end-to-end production & testing system, which measures the precision of each individual bulb and mask. Each bulb has fluctuations as low as +/- 2nm, compared to the industry average of +/- 10nm.


The Wavelengths
Foundational wavelengths: these are the most clinically proven wavelengths, penetrating to the dermis and deeper. You can decide where on your face you want to target these benefits, though they all can safely be used full-face.
Red (633nm): boosts ATP production, supports collagen production, reducing fine lines and wrinkles, reducing inflammation/redness.
Near-infrared (830nm): firms and tones, additional collagen renewal, enhanced cellular repair and wound healing.
Deep near-infrared (1072nm): deepest renewal, targeting most pronounced signs of aging and repair, like around the eyes and mouth and for deep-set wrinkles.
Targeted wavelengths: these wavelengths don’t penetrate as deeply, instead targeting superficial tissues for specific concerns. These wavelengths should only be used where needed and not all of the time.
Blue (415nm): kills acne-causing bacteria to reduce blemishes. Dosed conservatively in the Series 3 (as responsible blue light use should!!) and you can read more here on how to safely use blue light.
Green (532nm): brightens & balances skin tone, emerging evidence.*
Yellow (590nm): reduces redness for calmer skin, emerging evidence.*
*Emerging Evidence
One of the things I admire most about CurrentBody, which I’ve written about at length in the past, is their commitment to investing in research and conducting independent validation. One of these research areas is around green and yellow LED, which to date have much less published evidence compared to the others. CurrentBody has conducted independent studies with Eurofins (a reputable contract research organization) to validate their efficacy and give them confidence on how to safely incorporate them into the Series 3.
Personally, I am most excited about the customization possibilities with red, near-infrared, deep near-infrared and blue light. These are the wavelengths I will be optimizing with as I wait for more robust research to support green and yellow light. One of the coolest features about the Series 3 is that CurrentBody can push updates to the app to optimize the usage of these wavelengths as more data becomes available. So, even if you want to stick with the best-established wavelengths for now, you won’t have to buy a whole new device if you decide to explore other wavelengths in the future. You can view all of their research, both completed and ongoing here: CurrentBody Independent Testing.
Here’s a screen recording of a treatment I made on the app. I filled it with Red all over, added NIR along the jaw, cheekbones and temples, where I want firming, structural support, Deep NIR around my nasolabial folds and forehead, and Blue around my mouth and nose, where I get breakouts.
Then I sent it to my device! The image on the left is the one I made in the recording above. The right side shows another I made that more heavily features blue light.


The CurrentBody Series 3 LED Mask retails for $569 and you can get 10% off sitewide with my code JOLIECB.
Have a great week!
xx,
Jolie








